Last time, we began our look at advanced OSPF topics with the configuration of backbone and non-backbone areas. In this blog post, we'll look at the creation of more specific area types.
Figure 1 - OSPF Topology
It is time to make our Area 1 from Figure 1 a stubby area. This is a simple configuration change. On each device in the area, we need to set the Area 1 as stub. Here is the configuration in our network:
This will cause a reset of the adjacency (as you might guess). After this change, it is time to check the OSPF route table and the OSPF database on ORL:
Just as we would hope, the routing table is smaller now! There is no longer the detail of the external prefixes from the ASBR. Instead we have a default route automatically generated by the ABR. This default route is needed, of course, because the routers in Area 1 still need to be able to access the remote prefixes (if needed).
Now it is time to examine the OSPF database. It is exactly what we would expect to...
The time has arrived to tackle some of the more advanced (and interesting) features of the Open Shortest Path First routing protocol. We begin by examining the configuration and verification of the different OSPF areas. This is an exercise that is not only fun, but it can really cement the knowledge down of how these areas function and why they exist.
Areas are a fundamental concept of OSPF. It is what makes the routing protocol, hierarchical, as we like to say.
There is a core backbone area (Area 0) that connects to normal, non-backbone areas. The backbone might also connect to special area types we will examine in detail in this chapter. This hierarchical nature of the design helps ensure the protocol is very scalable. We can easily reduce or eliminate unnecessary routing traffic flows and communications between areas if needed. Database sizes are also contained using this approach.
The Backbone and the Non-Backbone Areas
To review a bit from our previous blog...
Before we move on to more advanced topics, we'll wrap up this OSPF Basics series in Part 3. Here we'll examine LSA types, area types, and virtual links.
Link State Advertisements (LSA) are the lifeblood of an OSPF network. The flooding of these updates (and the requests for this information) allow the OSPF network to create a map of the network. This occurs with a little help from Dijkstra’s Shortest Path First Algorithm.
Not all OSPF LSAs are created equal. Here is a look at each:
The Router (Type 1) LSA - We begin with what many call the “fundamental” or “building block” Link State Advertisement. The Type 1 LSA (also known as the Router LSA) is flooded within an area. It describes the interfaces of the local router that are participating in OSPF and the neighbors the local OSPF speaker has established.
The Network (Type 2) LSA - Remember how OSPF functions on an Ethernet (broadcast) segment. It elects a Designated Router...
In the previous blog post, we looked at a few fundamental OSPF concepts, including neighbor and adjacency formation. As we continue through the basics of OSPF, this post will examine router roles, timers, and metric calculation.
A designated router (DR) is the router interface that wins an election among all routers on a multiaccess network segment such as Ethernet. A backup designated router (BDR) is the router that becomes the designated router if the current designated router has a failure on the network. The BDR is the OSPF router with the second highest priority at the time of the last election. OSPF uses the DR and BDR concept to assist with efficiencies in the operations of OSPF.
Keep in mind that a given OSPF speaker in your network can have some interfaces that are designated and others that are backup designated, and others that are non-designated. If no router is a DR or a BDR on a given...
The OpenShortest Path First (OSPF) dynamic routing protocol is one of the most beloved inventions in all of networking, widely adopted as the Interior Gateway Protocol (IGP) of choice for many networks. In this blog series, you'll be introduced first to the basic concepts of OSPF and learn about its various message types and neighbor formation.
Where does the interesting name come from when it comes to OSPF? It is from the fact that it uses Dijkstra's algorithm, also known as the shortest path first (SPF) algorithm. OSPF was developed so that the shortest path through a network was calculated based on the cost of the route. This cost value is derived from bandwidth values in the path. Therefore, OSPF undertakes route cost calculation on the basis of link-cost parameters, which you can control by manipulating the cost calculation formula.
As a link state routing protocol, OSPF maintains a link state database. This is a form of a network...
One of the big announcements this week at Cisco Live was the launch of their new DevNet certification track. Cisco CEO Chuck Robbins reiterated the fact that knowledgeable engineers are always going to be in-demand. Contrary to what many believe, network automation and A.I. integration is not designed as a replacement for those skills, but rather these advancements allow the ability to manage numerous network devices and their services through software. For large scale networks, usage of API’s for automation is the way of the future.
The launch of this new certification track is aimed at joining the skills of software developers with network professionals, with the goal of accelerating the progress of network automation in organizations throughout the world.
Here's a breakdown of the current DevNet certification offerings:
This entry-level certification is accessible to those who are...
By now I'm sure you've heard of the sweeping changes Cisco is making to their certification tracks, which was announced at Cisco Live on Monday June 10, 2019. I covered the CCNA exam changes in a previous post, so here I'll specifically address updates to the CCNP track.
First, if you've already started working toward any current CCNP certification - keep going! You have until February 24, 2020 to complete your certification, and in the new program, you'll receive credit for work you've already completed.
Let's begin by looking at the current list of CCNP certifications, set to expire next February:
Now, here are the new CCNP certifications that will be rolling out:
You may notice the absence of CCNP...
On Monday June 10, 2019 Cisco announced an unprecedented revamp of their certification program. This post dives into one of the major updates, the new CCNA certification. (We'll have a future blog post with updates on the CCNP changes.)
First, if you’re currently preparing for your CCNA R/S (or any other CCNA for that matter), don’t panic. You have until February 24, 2020 to complete your certification, at which time you’ll be given the new CCNA certification, plus a “badge” indicating your area of specialization (based on which CCNA you earned). So, Cisco recommends you “keep going” if you’re working towards any CCNA certification.
Even if you’re just thinking about going after a CCNA cert, personally, I would do it now before the February deadline hits.
However, just having a current CCENT certification won't help. You'll need a full CCNA to be granted the new CCNA certification. So, if you do just have your CCENT,...
Cisco just announced their certification program is getting a MAJOR update. Here’s what you need to know:
This post is the 6th and final in a series of Border Gateway Protocol (BGP) posts. If you missed any of the first five parts, here are the links:
In this post, we're going to take a look at how we can work with BGP in IPv6.
You will recall from this chapter that BGP was constructed to support many different protocols and NLRI right out from its creation. As a result, we have robust support for such technologies as IPV6, MPLS VPNs, and more.
You will also relish in the fact that once you master the basics of BGP that we have covered in this , working with BGP in IPv6 is much more similar than it is different!
BGP is so remarkably flexible, as discussed earlier in this chapter, you can use IPv4 as the “carrier” protocol for IPv6...