3-Year Anniversary & My First Live On-Line Training Class In 3 Years

ccna r/s Sep 19, 2017

Some of my blog posts (most of them, in fact) focus on teaching you some technical content or offer career advice. But, sometimes, I just need to share a major milestone with you. That’s what I’m doing in this post (actually, a couple of major milestones), and I hope you can (virtually) celebrate with me.

The first milestone is my 3-year anniversary of being in business full-time as Kevin Wallace Training, LLC. Specifically, on Sept. 26, 2014, I walked away from my 14-year position as an instructor for a Cisco Learning Partner (CLP) to run my own business.

During the past three years, I’ve released a ton of training videos. However, I hadn’t actually taught a live online class, allowing me to interact with participants. That all changed this month, which brings us to the second milestone.

Earlier this week (I’m writing this on 9/15/17), I wrapped up my first live-online training class in about three years. I was given the opportunity to...

Continue Reading...

The 3 Topics You Need To Know For Your CCNA R/S Exam

ccna r/s May 23, 2017

Studying for your CCNA R/S (200-125) exam? If so, a perusal of the exam topics list can be daunting. Clearly, you’re going to spend a significant amount of time getting at least a passing familiarity with the myriad of topics. However, your focus should not be spread evenly over all topics. Rather, there are some topics that need a disproportionately large amount of study.

That’s the focus of this blog post, identifying 3 of the topics likely to appear multiple times on your 200-125 exam. These topics won’t come as any surprise, but I hope this will be a reminder to expend that extra measure of effort when reviewing “the big 3.” Let’s check out the list:

1. IP Addressing

To be prepared for IP addressing questions on the CCNA R/S exam, you need several skills, including:

  • Knowing how to convert between dotted decimal notation (e.g. 255.255.255.0) and slash notation (e.g. /24) for subnet masks.
  • Determining the number of useable IPv4 addresses in a...
Continue Reading...

Introduction to Python for Cisco Network Professionals

career success ccna r/s Mar 20, 2017

The day-to-day tasks of Cisco network engineers are in the midst of a major industry shift. Specifically, we’re moving away from traditional command line interface (CLI) commands, and moving towards having programs do the work for us. The industry term for this new environment is Software Defined Networking (SDN). Cisco’s SDN product suite is called ACI. As an example, we could write a program to talk with a Cisco APIC controller, which could then send out commands to multiple Cisco devices (e.g. routers and switches).

This change is going to require Cisco engineers to become proficient in programming, and the most common programming language for SDN is the Python programming language. Unfortunately, the challenge of learning a new programming language can be a bit daunting even to seasoned engineers.

Fortunately, this video will break the FUD (Fear, Uncertainty, and Doubt) surrounding Python. Specifically, in this video, you’ll learn:

  • How to download Python...
Continue Reading...

Understanding EIGRP Part 6 (Router ID and Neighborship Requirements)

ccie r/s ccna r/s ccnp r/s Feb 23, 2017

This blog post wraps up our series on Understanding EIGRP by discussing two final topics:

  • The EIGRP Router ID
  • EIGRP's Neighborship Requirements

Let's begin our discussion by considering the EIGRP router ID.

EIGRP Router ID

Each EIGRP-speaking router has an associated EIGRP router ID (RID). The RID is a 32-bit value written in dotted decimal format, like an IPv4 address. A router’s EIGRP RID is determined when the EIGRP process starts. Interestingly, EIGRP uses the same steps to RID calculation as does OSPF. The following list identifies these step, in sequential order:

Step 1. Use the configured RID value (using the eigrp router-id rid EIGRP router configuration mode command).

Step 2. If no RID is configured, use the highest IPv4 address on a loopback interface in the up/up state.

Step 3. If no loopback interface is configured with an IPv4 address, use the highest IPv4 address on a non-loopback interface.

Interestingly, while EIGRP requires a router to have a RID, the...

Continue Reading...

Understanding EIGRP – Part 5 (Static Neighbors)

ccie r/s ccna r/s ccnp r/s Feb 05, 2017

Typically, an EIGRP-speaking router dynamically discovers its neighbors, by sending multicast Hello messages. However, there is an option to statically configure those neighbors, and communicate with them via unicast messages. This is rarely done, but could on rare occasion be useful.

Consider for example a Frame Relay WAN. Imagine that router A has an interface configured with ten Frame Relay permanent virtual circuits (PVCs). At the other end of two of those PVCs resides EIGRP-speaking routers. However, the other eight PVCs do not have an EIGRP-speaking router at the far end. In such a topology, if router A’s WAN interface was participating in EIGRP, then router A would have to replicate its EIGRP Hello message and send a copy out all ten PVCs, resulting in an increased processor burden on router A and increased the bandwidth usage (unnecessarily) on the eight PVCs not connecting to an EIGRP router. This is the type of situation that would benefit from our statically...

Continue Reading...

Fundamentals of the Internet of Things (IoT)

It's another one of those buzzwords we're hearing a ton these days, the Internet of Things, or IoT for short.

But what exactly is it, and how's it going to impact us as networking professionals? That's what you'll learn in this new video: 

Continue Reading...

Understanding EIGRP – Part 4 (Passive Interfaces)

ccie r/s ccna r/s ccnp r/s Jan 31, 2017

Sometimes, we might want a router interface to participate in an EIGRP routing process (in order to advertise that interface's network) without that interface sending out EIGRP Hello messages. That's what we'll cover in this blog post.

By the way, this is the fourth posting in a series on Understanding EIGRP. If you missed any of the earlier postings, you can check them out here:

Previously, we talked about the network net-id wildcard-mask command issued in EIGRP router configuration mode. This command causes two primary actions:

  1. Sends EIGRP Hello multicast messages out any interface whose IP address falls within the network address space specified by the network command.
  2. Advertises the subnet of any interface whose IP address falls within the network address space specified by the network command....
Continue Reading...

Intermediate System to Intermediate System (IS-IS) Routing Protocol Fundamentals

ccie r/s ccna r/s ccnp r/s Jan 20, 2017

In our Cisco routing and switching studies, we commonly study routing protocols such as RIP, OSPF, EIGRP, and BGP. However, there's a very scalable, fast converging, link-state routing protocol that often gets overlooked and forgotten. It's Intermediate System to Intermediate System (or IS-IS for short).

IS-IS is primarily found in service provider environments, but even if you're not in the service provider world, you still might run into it at some point during your career. So, I wanted to create a video to take away the fear, uncertainty, and doubt from IS-IS. In this video, we'll look at the basic theory surrounding IS-IS and then go through a simple configuration.

 Enjoy the video!

Kevin Wallace, CCIEx2 (R/S and Collaboration) #7945

Continue Reading...

Understanding EIGRP – Part 3 (EIGRP Timers)

ccie r/s ccna r/s ccnp r/s Jan 09, 2017

Once of EIGRP’s claims to fame is its fast convergence in the event of a link failure. However, one thing that might slow down this convergence is timer configuration. That's the focus of this blog post, which is the third in a series of posts on Understanding EIGRP. If you missed the first couple of posts, you can get them here:

Let's beging our discussion of EIGRP timers by considering a situation where two EIGRP neighbors are directly connected to one another. If the physical link between them fails, each router’s connected interface goes down, and EIGRP can fail over to a backup path (that is, a feasible successor route). Such a situation is shown in the following figure:

 

Routers R1 and R2, shown in the above figure, are directly attached to one another. Therefore, if the cable between them physically breaks, each of the router interfaces connecting to that link go down, and EIGRP realizes that it...

Continue Reading...

Understanding EIGRP – Part 2

ccie r/s ccna r/s ccnp r/s Dec 02, 2016

In the first blog post in our Understanding EIGRP series, we were introduced to EIGRP’s features, in addition to a basic configuration example, and a collection of verification commands. Now, in this post, we’ll delve into the behind the scenes action of how EIGRP establishes a neighborship, learns a route to a network, determines what it considers to be the best route to that network, and attempts to inject that route into a router’s IP routing table.

EIGRP’s operations can be conceptually simplified into three basic steps:

Step 1. Neighbor Discovery: Through the exchange of Hello messages, EIGRP-speaking routers discover one another, compare parameters (for example, autonomous system numbers, K-values, and network addresses), and determine if they should form a neighborship.

Step 2. Topology Exchange: If neighboring EIGRP routers decide to form a neighborship, they exchange their full topology tables with each other. However, after the...

Continue Reading...
Close

50% Complete

Two Step

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.